We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Manufacture ODM & OEM Nylon rack and pinion gears
rack and pinion gears is a variety of engineering plastics employed in extensive industries, has been utilized almo EPT every single industrial area.
The caprolactam monomer is fir EPT melted, and extra catalyst, then poured it inside of moulds at environment pressure so as to form in diverse plastic components, these kinds of as: Rod, plate, tube. Its mechanical properties are a lot greater than iron.Also it is considerably lighter than iron components.
Oil nylon(green)
Oil nylon(eco-friendly)is the new engineering plastics that developed by HangZhou engineering plastics industireis firm in the later 1980’s by importing the superior engineering from nylaca EPT co., ltd, uk, was the fir EPT genuine lubricating nylon that builds the liquid lubricant technique in the course of the processing stage, which helps make its coefficient of friction is 50% reduced than the basic pa6 or pa66, the wear-resistance is ten moments than the common ones. Oil nylon is specially created for the areas of non-self-lubrication, hefty-loading and lower-speed-managing, which naturally resulted in a substantial increase in bearing daily life- 5 occasions that of common pa6 and twenty five moments that of phosphor bronze! The lubricant contained inside the materials will not drain, adsorb or dry out and by no means requirements replenishment. The uniform distribution of the lubricant through the product guarantees the continuous performance of the components above the complete provider daily life and enhancements in price of wear, sliding frictional homes, abrasion resistance and stick slip efficiency, which are ju EPT a few of the rewards offered by this materials. Oil nylon has been successful in substantial enlarging the application of nylon in numerous industries and particularly for some un-lubricated operating components.
EPT casting nylon:
Oil nylon + carbon (black)
Oil nylon added carbon, has the very compact and crystal construction, which is greater than the basic casting nylon in the overall performance of high mechanical toughness, wear-resistance, anti-ageing, uv resistance and so on. It is appropriate for generating the bearing and EPT use mechanical elements.
Oil mc901(blue)
This improved mc nylon, has hanging blue color, which is far better than common pa6/pa66 in the efficiency of toughness, overall flexibility, fatigue-resistance and so on. It is the perfect materials of gear, equipment bar, transmission equipment and so on.
Mc nylon + mso2(light-weight black)
Mc nylon extra mso2 can stay the affect-resistance and tiredness-resistance of casting nylon, as nicely as it can boost the loading ability and dress in-resistance. It has a vast application in making gear, bearing, planet gear, seal circle and so on.
Propertites for your reference:
Property | Item No. | Unit | MC Nylon (Natural) | Oil Nylon+Carbon (Black) | Oil Nylon (Eco-friendly) | MC90 (Blue) | MCNylon+MSO2(Light-weight Black) | |
Mechanical Qualities | 1 | Density | g/cm3 | one.15 | 1.15 | 1.one hundred thirty five | 1.15 | one.16 |
2 | Drinking water absorption (23ºCin air) | % | 1.8-2. | one.8-2. | two | 2.3 | two.four | |
three | Tensile toughness | MPa | 89 | 75.three | 70 | eighty one | 78 | |
4 | Tensile pressure at crack | % | 29 | 22.7 | 25 | 35 | twenty five | |
5 | Compressive stress (at 2%nominal strain) | MPa | 51 | 51 | forty three | 47 | 49 | |
six | Charpy impact power (unnotched) | KJ/m 2 | No brak | No split | ≥50 | No BK | No split | |
7 | Charpy effect energy (notched) | KJ/m 2 | ≥5.7 | ≥6.four | four | three.5 | three.5 | |
8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
nine | Ball indentation hardness | N/mm two | 164 | 150 | a hundred forty five | one hundred sixty | 160 | |
10 | Rockwell hardness | – | M88 | M87 | M82 | M85 | M84 |
rack and pinion gears
Manufacturing unit
Because the stop of 1980’s, HangZhou engineering plastics industireis firm has devoting herself on establishing the technology of mc nylon modification, drastically extended the purposes in various industries. Basing on the mc nylon, strengthened with variety of additives in the course of the reaction, this sort of as lubricant, molybdenum disulfide, graphite glass fiber, carbon fiber etc, to increase the homes, higher overall performance of use-resistance, corrosion-resistance, self-lubrication, vibration-absorption, sound-absorption. At the very same time, as the technics and composition of the moulds is really simple, so that it can be produced in reduced cost, becomes the perfect substitutes of bronze, stainless steel, babbitt alloy, ptfe and so on.
Our gain
1.Abundant industry encounter given that 1988.
2.Wide arrange product line, including plastics sheet/rod/parts/accessories: MC NYLON, OIL NYLON, POM, UHMW-PE, PU,PSU,PMMA, PETP, Laptop, PTFE, PVDF, PPS, PEEK, PAI, PI, PEI ect.
three.Manufacture, style and processing provider as for each your need.
FAQ
one.A: What’s the dimension of plastics sheet?
B:Nylon sheet:Thickness*Width*Duration:twenty-100*1000*2000mm
UHMW-PE sheet:Thickness*Width*Length:twenty-a hundred*1000*2000mm 20-a hundred*1250*3130mm twenty-one hundred*1250*4250mm
POM sheet:Width*Size:a thousand*2000mm
2. A:Can we buy a small component of plastics sheet?
B: Yes,you can, if we have the size you need in stock.
three. A:What color of plastics sheet?
B: Nylon sheet: Natural,black,blue,or according to client’s requiremnet.
UHMW-PE sheet: White,black,inexperienced ,bule,yellow,or in accordance to client’s necessity.
White,black
4. A:Can you manufacture the plastics goods as per drawing?
B: Yes,we can.
5.A: What the precision of plastic goods in accordance to drawing?
B: Different equipment with different precision,it generally close to .05-.1mm
six.A: What the technologies in generating plastics components?
B: Different merchandise with various technologies,this kind of as CNC device,Extrusion,Injection
7: A:What varieties of processing equipment do you have?
B: CNC machining heart,CNC lathes,Milling,Injection Molding Device,Extruder,Moulding press
The use of first equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the shown substitution areas contained herein are not sponsored, accredited, or manufactured by the OEM.