China wholesaler 08b× 25z Forged High-Strength Hard Tooth Surface Sprockets for Windrower chain sprocket price

Product Description

 

Main parameter Diameter High Weight /Kg Inner hole specification Material
107 17 0.48 Ø20-6 45#
Chain number 08B Number of teeth 25 Hardness HRC40-45

 

Unit: mm

Single bond
Simple process and high universality

 

Special tool processing
Forming tool processing, standard tooth shape, high precision

 

Forging blank
High density, high strength, material saving

 

1 Q: Notice before purchase
A: The parameters in the product details are reference values, which may be different from the actual size. Before making an order, be sure to confirm the size you need with our customer service. All rubber parts, CZPT and other vulnerable parts are not covered by the San Bao warranty.
2 Q: Questions about return and replacement
A: As the goods are customized products, all products must be sampled before batch ordering to determine the size data and performance data. We will not accept any request for return or replacement of products that are directly customized in batches without passing the sample verification of relevant performance. Please fully communicate with us before ordering the samples. Once the samples are sold, they will not be returned or replaced.
3 Q: Payment method
A: 50% of the total payment for goods shall be paid at the time of ordering, and the contract shall be deemed to be effective after the payment is received; The balance payment shall be paid after the goods are produced and packaged, and the goods shall be delivered after the balance payment is received.
4 Q: Who bears the transportation and packaging costs?
A: According to the principle of proximity, we will pay the transportation and packaging costs from the company to the site (international express) or port, and the later costs after the goods arrive at the site or port will be borne by the buyer.
5 Q: How long is the delivery time?
A: Due to product characteristics, except for a few products with a small amount of inventory, the production of other products starts after the order contract takes effect. Therefore, the supply cycle should be determined according to the order.
6 Q: How to ensure the safety of cargo transportation?
A: Before the product leaves the factory, the most suitable packaging method among carton, wooden case, tray, iron basket, iron box and container will be selected according to the characteristics of the product. At the same time, adhesive tape, packing belt, steel belt, adhesive tray film, foam board, bubble film and other packing materials will be used to seal, fix and cushion the filling materials, so as to ensure the safety of the goods during transportation as far as possible.

 

Standard Or Nonstandard: Nonstandard
Application: Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Structural Stee-45#
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China wholesaler 08b× 25z Forged High-Strength Hard Tooth Surface Sprockets for Windrower     chain sprocket priceChina wholesaler 08b× 25z Forged High-Strength Hard Tooth Surface Sprockets for Windrower     chain sprocket price
editor by CX 2023-07-13