China Factory Medical Central Suction Equipment Vacuum Suction Pump for Hospital Use sprocket company

Merchandise Description

     
Product OVERVIEW

one.oil lubrication healthcare suction method Description
ETR has independently produced an integrated vacuum suction device composed of oil lubrication vacuum pump, vacuum buffer tank, sterilizing filter, cooling program, unfavorable stress fuel treatment method device, pipe fittings and distant cellular checking technique.
It is a simple, protected and reputable unit that continuously serves the wards all working day lengthy, without occupying the ward area. The unfavorable strain is sourced from the vacuum pump device.

Gain
Computerized and smart electrical management technique
Modular design, little location occupation, adaptable to be positioned
Open knowledge interaction interface facilitates system’s distant administration
Oil lubrication vacuum pump, large efficiency, low sound, stable and reliable procedure
Higher-efficiency sterilizing filter ensure for the setting friendly sterile discharge
Dynamic process exhibit, operation data storage, fault protection and abnormal alarm
Intelligent handle and operation with contact display screen, being operated and switched automatically
24 hrs clever monitoring and recording by Cellular telephone App, with messages alarm in circumstance of failure.

 

Product Pressure
(MPa)
Inlet/Outlet Electricity Source Electrical power
(KW)
Dimensions (mm)
L*W*H
Weight
(KG)
Sound
dB(A)
Vacuum Tank(M3)
ETV-02 .one G2″(DN50) AC380V/50Hz/3P two.2X2 1200x850x1560 475 ≤62 one
ETV-03 .1 G2″(DN50) AC380V/50Hz/3P 3.0X2 1200x850x1560 495 ≤62 one
ETV-04 .1 G2″(DN50) AC380V/50Hz/3P four.0X2 1200x850x1560 665 ≤70 one.five
ETV-05 .1 G2″(DN50) AC380V/50Hz/3P 5.5X2 1200x850x1560 665 ≤72 one.five
ETV-07 .1 G2″(DN50) AC380V/50Hz/3P 7.5X2 1200x850x1560 755 ≤74 2
ETV-eleven .one G2″(DN50) AC380V/50Hz/3P 5.5X4 1200x850x1560 1330 ≤73 3
ETV-15 .one G2″(DN50) AC380V/50Hz/3P 7.5X4 1200x850x1560 1510 ≤73 4

three.Item Model of oil lubrication health care suction system

Firm OVERVIEW

one.Simple Information about ETR

 

Our Services

1. Placing trace file for each and every bought product, quarterly survey for each and every bought product.
two. Offering distant instruction and education for free of charge.
3. Providing on-internet site services and repairs for totally free for the duration of guarantee interval if issues brought on by Eter.
4. Spare parts and on-web site support would be altered with very best value following guarantee period.
five. 7*24 several hours on the web support for totally free, offering remedy for any problems inside forty eight hrs. 
six. If client essential, assigning knowledgeable right after-revenue engineer for on-site services with 7 times. (Visa implement must be regarded)

FAQ:

Q: Are you factory or buying and selling business?
A: We are factory specilized in creating healthcare equipments from year 2003.

Q: Where are you?
A: We are in ChangSha,ZheJiang province,3 several hours from HangZhou by substantial-pace rail.

Q: Do you acknowledge the little purchase?
A: Yes, you can get in touch with with us.

Q: Can we place our logo on your goods?
A: Yes, we can tailored your brand. But the amount of the things have unique demands.
 
Q: What certifications do products have for your company?
A: CE, ISO and SGS at current.

Q: Do you supply specialized help?
A: Yes, technological support is obtainable following sales,if essential,we will provide our technicist to abroad to service you.

US $100,000
/ Piece
|
1 Piece

(Min. Order)

###

Oil or Not: Oil
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: Vacuum
Work Function: Pre-Suction Pump
Working Conditions: Dry

###

Customization:

###

Model Pressure
(MPa)
Inlet/Outlet Power Supply Power
(KW)
Size (mm)
L*W*H
Weight
(KG)
Noise
dB(A)
Vacuum Tank(M3)
ETV-02 0.1 G2"(DN50) AC380V/50Hz/3P 2.2X2 1200x850x1560 475 ≤62 1
ETV-03 0.1 G2"(DN50) AC380V/50Hz/3P 3.0X2 1200x850x1560 495 ≤62 1
ETV-04 0.1 G2"(DN50) AC380V/50Hz/3P 4.0X2 1200x850x1560 665 ≤70 1.5
ETV-05 0.1 G2"(DN50) AC380V/50Hz/3P 5.5X2 1200x850x1560 665 ≤72 1.5
ETV-07 0.1 G2"(DN50) AC380V/50Hz/3P 7.5X2 1200x850x1560 755 ≤74 2
ETV-11 0.1 G2"(DN50) AC380V/50Hz/3P 5.5X4 1200x850x1560 1330 ≤73 3
ETV-15 0.1 G2"(DN50) AC380V/50Hz/3P 7.5X4 1200x850x1560 1510 ≤73 4
US $100,000
/ Piece
|
1 Piece

(Min. Order)

###

Oil or Not: Oil
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: Vacuum
Work Function: Pre-Suction Pump
Working Conditions: Dry

###

Customization:

###

Model Pressure
(MPa)
Inlet/Outlet Power Supply Power
(KW)
Size (mm)
L*W*H
Weight
(KG)
Noise
dB(A)
Vacuum Tank(M3)
ETV-02 0.1 G2"(DN50) AC380V/50Hz/3P 2.2X2 1200x850x1560 475 ≤62 1
ETV-03 0.1 G2"(DN50) AC380V/50Hz/3P 3.0X2 1200x850x1560 495 ≤62 1
ETV-04 0.1 G2"(DN50) AC380V/50Hz/3P 4.0X2 1200x850x1560 665 ≤70 1.5
ETV-05 0.1 G2"(DN50) AC380V/50Hz/3P 5.5X2 1200x850x1560 665 ≤72 1.5
ETV-07 0.1 G2"(DN50) AC380V/50Hz/3P 7.5X2 1200x850x1560 755 ≤74 2
ETV-11 0.1 G2"(DN50) AC380V/50Hz/3P 5.5X4 1200x850x1560 1330 ≤73 3
ETV-15 0.1 G2"(DN50) AC380V/50Hz/3P 7.5X4 1200x850x1560 1510 ≤73 4

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
sprocket

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Factory Medical Central Suction Equipment Vacuum Suction Pump for Hospital Use     sprocket companyChina Factory Medical Central Suction Equipment Vacuum Suction Pump for Hospital Use     sprocket company
editor by czh2022-12-01