10kw 400V 905~1400rpm Brush DC Electric Motor

10kw 400V 905~1400rpm Brush DC Electric Motor

 

Z4 Series DC Motor     

Power: one.4kw – 600KW

Voltage: Normal 160V, 400V, 440V

Velocity: Rated Velocity reference

Defense Diploma: IP21S

Insulation Course: F

Obligation: S1

Deal: Export Wooden Package

Payment: forty% in progress, equilibrium by T/T or L/C at sight

 

Z4-132-two, 10KW, 400V, 905~1400r/min, IC06, IP21S, F Insulation

CZPT Info

 

Mounting Proportions

CZPT

one. Mounting and Kind of development

Mounting modes comply with the State CZPT GB/T997 stipulated as follows:

2. Security and Cooling Strategy.

The fundamental cooling approach of motor is IC06, It means it have a blower for ventilate, also it can be created for IC17, It means use pipe as the cold air inlet, the air outlet is shutter structure. Also it can be created for IC37, it indicates the cold air’s inlet and outlet both use pipe. And it’s have several deriving form, such as self-ventilation, axial circulation enthusiast kind, enclosed sort, air-air cooler kind, and many others. The request for the air stream, blast strain, electrical power of the air blower, and so forth of diverse frame motor remember to see complex info sheet 1. The defense diploma of whole collection Z4 motor reaches IP21S

a. For Z4-a hundred – Z4-160, The blower is mounted on the non-generate aspect.

b. For Z4-180 – Z4-450, The blower is mounted on the push side.

c. The required cooling air quantity, air strain and admirer motor ability are demonstrated underneath:(Table 1)

*All the ventilating admirer motors are three section, two pole, 380V.

Motors with the adhering to 5 approaches of cooling can also be purchased, but prior consultations are essential.

a. Body measurement 100 up to 250 could be produced into the totally enclosed, frame cooled motor(IC410).

b. Frame dimension one hundred eighty up to 250 may be created into the separately ventilated motor with blower mounted on its non-travel side(IC05).

c. Frame dimensions 100 up to two hundred might be produced into self-cooled open motor with its own enthusiast mounted on the shaft(IC01).

d. Frame dimension one hundred sixty up to 355 may possibly be produced into totally enclosed motor with internal cooling air circulation by unbiased air-air heat exchanger mounted on it(IC666).

e. Body size 160 up to 450 might be created into totally enclosed motor with impartial air-h2o warmth exchanger mounted on it(IC86W).

 

From the generate conclude(Non-commutator place), The normal terminal box is on the correct position of the motor body. For the request by client, the terminal box can be made on the reverse placement. Also the shaft can be manufactured as double shaft conclude. The rotor shaft’s rotation route is counter clock-wise seen from the situation of commutator. The driving method is versatile coupling link, also can be use for the driving manner have specific radial force(this sort of as belt push or equipment push), It really is allowable radial power need to not exceed the benefit of graph.(see hooked up B)

 

3. Add-ons for electric powered motor

In accordance to customer’s ask for, the motor can be created to allocate for tacho generator, pulse generator, centrifugal change, arrester brake and so on.

Notice: the specification, electricity and weak-magnet speed range is only for reference, For the refresh of new systems, new supplies, the info of the catalog will be transformed accordingly.

 

CZPTal efficiency

one, complex info should be used according to the adhering to info perform conditions                  

A. altitude does not exceed 1000m,
B. bordering air temperature is not more than 40 ° c,
C. function setting must not include acid and alkaline or other to contact with insulation   influence of gasoline.
D. motor for ongoing responsibility (S1),
E. motor armature loop and excitation circuitry by static electricity, rectifying energy source by dc generators.

F. the sequence motor functionality with GB/T755 the basic technological innovation of motor.
two, motor 160V rated voltage is standard, 440V. In accordance to the distinct situations can derive   220V and 400V or other voltage.
3, motor rated speed 3,000, fifteen, ten, 750, 6, five, 4, 3, 200r/min of 9.
To reduce the armature voltage continuous torque control, decrease excitation constant power voltage for velocity. Speed variety of technological info table observed.

In the following with rated voltage regulating speed is consistent torque. It is no considerably less than the bare minimum velocity regulation 20r/min, still can keep the rated speed, torque.

four, Separate excitation is the standard excitation type of the motors. Nominal subject voltage: 180V. Other excitation voltages are also satisfactory on ask for. 
Pressured excitation is allowed with the voltage of considerably less than 500v. When a motor is generally managing, its excitation present need to not be greater than the rated excitation existing.

To make sure the trustworthiness of the insulation of excitation technique, disconnect excitation circuitry on a subject winding resistance, launch finishes in parallel to avoid self-induction possible. In its value normal excitation voltage is about seven moments the area winding resistance (chilly point out). Whilst the discipline voltage is greater than nominal voltage, the price of shunt resistance may be decrease than seven instances subject resistance, or else increased than seven instances.
5, For frame dimensions Z4-315, Z4-355,Z4-400, and Z4-450, compensating windings are supplied. For frame size Z4-250 and Z4-280, the motors are feasible with a compensating winding way too.

six, A marked earthing terminal is presented for the motors.

seven, The efficiency listed in the info sheet are for rated output, voltage and speed , and incorporate excitation losses, excluding that of different ventilating supporters.  

Get Recognize

one. Pls check out our items catalog and confirm the motor sort and specification just before place buy,  and sort variety as attainable as regular requirements demonstrated in catalog. For motor  body size, power, voltage, velocity, interesting method, thrilling voltage and mounting sort, should be pointed out clear in income contract. Such as Z4-one hundred eighty-31, 37KW, 440V, 1000r/min, separated excitation 180v, horizontal mounting with ft or IMB3.

two. Some particular needs this kind of as : double shaft end, terminal box situation are mounting in the opposite way, counter clock-smart rotation have to be described evidently in the agreement.

3. If the consumer need to have type, specification are not record in the catolog, or for other particular requirement,  the contract or the pre-generation settlement ought to be signed following equally party’s dialogue and arrangement

four. All the motors , Besides the shaft extension essential, all the accessories are not in the extent of source, If the accessories or spare components are requested,  these kinds of as the brush, brush holder, and so on,  pls note the title, specification and portions of the accessories in the contract.

five. For particular atmosphere operating condition, motor would be employed in humid and hot regions,  pls label TH in the origin variety.

Packaging & Delivery

Tests Equipment

10kw 400V 905~1400rpm Brush DC Electric Motor

Tags: